Carport Attached to Side of House

A carport attached to the side of your house is a great way to protect vehicles without encroaching on your driveway or taking away valuable space. The structure also serves as a covered gathering area for guests or family members to enter and exit the car.

Prepare the Ground: Refer to your carport design plans to identify the position of the footings or piers. Dig holes at these locations, and double-check that they are properly aligned.

Pick the Right Spot

When you add a metal carport to the side of your house, it can provide economical shelter for vehicles and lawn equipment. It also can enhance the look of your home, as well as improve its value when you sell it.

Start by clearing the area where you plan to build your carport. Call 811 to find out if there are any underground utilities in the vicinity. Use stakes to mark the corners of the site.

Double-check the measurements and markings to make sure they match your design plans. Next, mark the positions of the footings or piers. If necessary, dig holes at the designated locations and fill them with concrete according to the recommended specifications in your design plans. You can also hire a professional to do this for you. Once the concrete is cured, it will serve as the foundation of your new carport. It will prevent water or soil from pooling under the structure, which can damage or corrode the steel.

Build the Frame

Before constructing the frame for your carport, check with the building department to ensure that you can proceed with construction and that you understand any local regulations such as setback requirements. You may also need to get a permit, depending on your location and the specific type of carport you choose.

Once you have determined that you can build a carport attached to your home, mark the locations of the ledger boards or attachment plates and any footings or piers. Dig holes at the marked locations and use post-hole diggers to create a solid base for your structure.

After installing the support beams and checking that they are square with the house wall, you can begin to construct the roof frame. Fit the rafters to the support beams, then add braces. Ensure that the rafters are positioned and aligned to promote an even roof slope. Caulk the seams to keep out rain and other elements.

Install the Roof

A carport attached to the side of your house provides added protection for vehicles without requiring any additional space on the property. This design also allows for easy access from the front of the home, eliminating the need for a driveway or walkway that would otherwise be used to park cars.

Before you start building, check with your local regulations to see if your carport needs a permit. Make sure the spot you choose has adequate room for your final structure, as well as a clear work area to set up tools and materials. If you have a lot of trees on your property, consider clearing out some of the surrounding foliage for more space to work.

Refer to your carport’s design plans and mark the locations for the footings or piers, double-checking the measurements. Dig holes in the ground at each location according to the recommended specifications. Make sure you also call 811 to have all underground utilities located and marked before beginning construction.

Add Lattice Panels

If you want to provide more shade and privacy in your carport, consider adding lattice panels. You can use wood or vinyl lattice, both available at lumber yards and big box stores. Choose the material that is most suitable for your environment and budget.

To install the panels, first dig holes for each post in the ground. Then use batter boards and string to layout the posts. Using a level, make sure the posts are plumb and aligned properly with the frame. If necessary, temporarily brace the posts in place to keep them steady while the concrete footings cure.

Once the posts and frame are in place, it’s time to add the sidewalls. If you’ve chosen framed screens or lattice, begin by attaching them to the frames of the carport and making sure they’re level, flush, and securely attached. You can also add windows or ventilation options to the sidewalls to improve airflow and prevent condensation buildup inside your carport.

from Carports Wollongong Solutions https://ift.tt/dk7IohZ
via IFTTT